Sat Apr 27 19:53:20 UTC 2019 build_installer.sh: remove final dangling symlink check. This gets into a filesystem loop that takes a bit of time, and has never turned up any dangling symlinks that actually need attention. +--------------------------+ Sun Mar 3 19:17:45 UTC 2019 Update busybox to 1.30.1. +--------------------------+ Sat Jan 26 19:58:30 UTC 2019 Fixed detecting FAT/NTFS partitions on UEFI systems. +--------------------------+ Fri Jan 25 23:06:42 UTC 2019 Updated the elilo bootloaders in /EFI/BOOT which were older versions (possibly with the 8MB kernel size limit?) +--------------------------+ Thu Jan 24 20:01:25 UTC 2019 SeTEFI: If the kernel doesn't detect efi, bail. SeTEFI: Detect EFI partition using lsblk. Thanks to Didier Spaier. +--------------------------+ Tue Jan 22 22:42:47 UTC 2019 Before running the CONFIGURE section, create bind mounts to /dev, /proc, and /sys. This is useful for chrooting and setting up boot loaders. Also add "mkbindmounts" command to do this manually for anything that's mounted on /mnt. This avoids having to type these commands when using the installer for system rescue purposes. +--------------------------+ Sun Jan 6 19:54:10 UTC 2019 Account for .x64 suffix on /boot/config-* files with x86_64 when installing the config files and /boot/config symlink. Thanks to Edward Grattan. +--------------------------+ Wed Nov 28 05:31:04 UTC 2018 Activate LVM volumes at boot, not only when setup is run. Make /etc/mtab a symlink to /proc/mounts on the installer. On a freshly installed system, make /etc/mtab a symlink to /proc/mounts. Include f2fs-tools on the installer. Support installing on F2FS partitions. +--------------------------+ Wed Oct 10 22:41:29 UTC 2018 Added Hyper-V keyboard and framebuffer modules. +--------------------------+ Thu Sep 13 19:42:20 UTC 2018 Load ter-114v.psf.gz in rc.font. +--------------------------+ Mon Sep 10 20:41:59 UTC 2018 Switch to ter-114v.psf.gz as the consolefont. It has been reported that the font we were using (ter-v14v.psf.gz) restricts the available console colors from 16 to 8 due to needing an extra bit for the higher number of available glyphs (though in testing here I couldn't see any difference). The new font covers ISO8859-1, ISO8859-15, and Windows-1252 codepages. I'm still not sure it's the best choice, so additional input is welcomed. +--------------------------+ Wed Jul 25 03:29:26 UTC 2018 Use ter-v14v.psf.gz as the consolefont. It supports more character sets, and the larger font was causing wraparound on UEFI (at least on bare metal here). +--------------------------+ Fri Jun 22 23:38:50 UTC 2018 Added libaio (needed by lvm). +--------------------------+ Wed Jun 20 21:08:45 UTC 2018 Upgraded dropbear. Thanks to Robby Workman. +--------------------------+ Mon Jun 18 17:53:56 UTC 2018 When compressing the initrd with xz, add: -C crc32 Use xzcat instead of zcat in a few places where the build script wants to extract a previous initrd. +--------------------------+ Mon Jun 18 04:13:53 UTC 2018 Copy libefiboot to the installer (needed by efibootmgr). Compress the kernel modules with xz. Compress the initrd image with xz. +--------------------------+ Thu Jun 14 01:16:42 UTC 2018 Copy libefivar to the installer (needed by efibootmgr). +--------------------------+ Wed Jun 6 20:31:26 UTC 2018 Fix finding some DOS/Win partition types. Thanks to Stuart Winter. Wipe the probe md5sum to force rescanning partitions if setup is restarted. +--------------------------+ Sat Apr 28 20:04:23 UTC 2018 Reduce sleep times in the installer. You'll just have to read faster. ;-) +--------------------------+ Sat Apr 21 00:29:54 UTC 2018 Use busybox's dd after all... it wasn't the cause of the size display bug. Don't try to migrate /tmp storage to the hard drive. We're not in the floppy disk era any more and are unlikely to run out of space on a tmpfs. +--------------------------+ Wed Apr 18 04:06:45 UTC 2018 Update busybox to 1.28.3. Add dd and mcookie to the installer. Add a dialog when setup starts to tell the user that partition information is being collected. +--------------------------+ Sat Mar 31 18:00:31 UTC 2018 sources/initrd/skeleton_initrd.tar.gz: /sbin/probe: use md5sum of /proc/partitions to determine if previously cached results should be returned. +--------------------------+ Thu Mar 22 09:51:59 UTC 2018 Fixes for ARM: * Fix module loading from etc/rc.d/rc.S * Update architecture quadlet for build target +--------------------------+ Thu Mar 1 21:56:38 UTC 2018 Put up "Scanning for USB stick..." dialog during the scan delay. Make "terse" the pre-selected menu mode. +--------------------------+ Thu Mar 1 06:55:30 UTC 2018 /sbin/probe: Add -c option to use the cached previous results if possible. Use cached probe where possible in /usr/lib/setup scripts. In many places, remove double spaces from after sentences in accordance with the Chicago Manual of Style recommendations. +--------------------------+ Mon Feb 19 22:30:33 UTC 2018 Add packages: lzip, lzlib, plzip. +--------------------------+ Tue Feb 13 06:43:38 UTC 2018 Put files in the same places that they would be on a real install, instead of shoving everything into /bin. Remove busybox symlinks if we have a real version to use instead. Don't copy /bin/tar-[0-9]* to the installer. /bin/tar is good enough (check it with --version ;-), and the pkgtools no longer use tar-1.13. Don't sed the ldd shebang, no need now that we have a /usr/bin/bash symlink. Make sure that /bin/sh points to bash, but don't mess with other shell links. Copy /usr/bin/ddrescue from the package to the installer. +--------------------------+ Sun Feb 4 04:24:08 UTC 2018 Create /etc/default directory. Include /etc/default/{nfs,rpc} +--------------------------+ Wed Nov 22 18:34:44 UTC 2017 Update to the newer elilo.x64 binary in sources/efi* +--------------------------+ Wed Nov 22 04:49:08 UTC 2017 SeTEFI: Don't use fdisk -l (unneccessary). Thanks to Didier Spaier. SetEFI: Scan /dev/mmcblk[0-9]. Thanks to zerouno. probe: Filter another possible EFI partition label. +--------------------------+ Sun Nov 12 22:08:51 UTC 2017 Include iproute2 and hostname packages (to get hostname and ip man pages). +--------------------------+ Mon Oct 2 17:35:19 UTC 2017 slackinstall: When doing a network install, don't download a package if the tagfile is going to skip installing it. Thanks to ivandi. +--------------------------+ Sat Sep 30 21:06:10 UTC 2017 SeTnet attempts to cat $TMP/SeTT_PX at boot time, when it doesn't exist. I just directed stderr from these attempts to /dev/null to get rid of the error message, but perhaps there's a bug here that needs to be addressed? SeTnet doesn't actually seem to use $T_PX for anything other than determining if it's running on the installer or an installed system. +--------------------------+ Fri Jul 28 17:09:07 UTC 2017 Upgraded to busybox-1.27.1, and enabled damn near everything. Might as well, since the size of e.g. kernel modules will dwarf the busybox binary anyway, and any real utilities we use will be copied over the symlinks after busybox is built. Removed /usr/bin/man shell script -- use busybox man applet instead. Create /usr/bin/man? -> cat? symlinks to make busybox man happy with the preprocessed manpages. +--------------------------+ Mon Jul 17 18:47:36 UTC 2017 In busybox-dot-config, add support for findfs and volume ids. +--------------------------+ Fri Jul 7 18:53:31 UTC 2017 Dnsmasq has changed to using libidn2, so add the libidn2 library and the libunistring library to the installer. Don't add libidn version 1 anymore, as nothing else on the installer uses it. +--------------------------+ Tue May 9 20:22:15 UTC 2017 Replace hardcoded /mnt with ${T_PX} in many places. Thanks to alienBOB. +--------------------------+ Tue May 9 18:43:55 UTC 2017 Use nosuid,nodev,noexec mount options for /dev/shm in installer-created /etc/fstab. +--------------------------+ Thu May 4 21:31:35 UTC 2017 Patched SeTEFI and probe to fix NVMe support. Thanks to Didier Spaier. +--------------------------+ Thu Feb 23 19:00:56 UTC 2017 sources/initrd/skeleton_initrd.tar.gz: /sbin/probe, line 156: filter output through strings to avoid bash warning about NUL bytes in input. +--------------------------+ Mon Jan 2 23:34:36 UTC 2017 build_installer: Use the 'bash' package rather than compiling it. Removed some old ARM cruft. Added some basic 'aarch64' (arm64) support. +--------------------------+ Sat Dec 24 00:53:47 UTC 2016 build_installer: Do not include libtermcap. Also, I'd rather see this use the bash package than compile bash, just to save a bit of compile time. There's currently no reason to be compiling this, and the given reason is "in case we might need diet configure flags sometime in the future". YAGNI. +--------------------------+ Tue Jul 12 17:25:10 UTC 2016 build_installer: Switched soft->hard float CFLAGS. Removed trailing white space. +--------------------------+ Tue Jun 7 10:36:58 UTC 2016 build_installer: Added /etc/nfsmount.conf so that any default changes made to the nfs-utils package exist within the installer. Moved some of the file copying script around. sources/initrd/skeleton_initrd.tar.gz: Removed etc/nfsmount.conf, etc/dialogrc (was already copied by the build_installer script). MoZes. +--------------------------+ Fri May 27 19:45:28 UTC 2016 Forgot to make rc.dropbear executable, AAAAAARGH +--------------------------+ Wed May 25 23:08:19 UTC 2016 In rc.dropbear, don't tell it to use motd.net, which no longer exists. +--------------------------+ Fri May 20 17:10:54 UTC 2016 Include /sbin/e4crypt. +--------------------------+ Wed May 11 23:43:13 UTC 2016 In rc.S, comment out making motd.net telling the user to source /etc/profile. Dropbear handles things properly without that now. +--------------------------+ Tue May 3 19:53:33 UTC 2016 Include md/dm-raid.ko module for LVM with internal RAID support. +--------------------------+ Sun Apr 24 00:27:03 UTC 2016 Patched busybox to fix newly created directory perms on 64-bit platforms. +--------------------------+ Sat Mar 19 21:27:44 UTC 2016 Increase "full install" size estimate to 9+ GB. +--------------------------+ Sat Mar 19 19:01:06 UTC 2016 Add libpci.so.* to the installer, since lspci needs that now. +--------------------------+ Sat Mar 5 18:12:03 UTC 2016 Use "mkfs.brtfs -f" in SeTpartitions. Thanks to Didier Spaier. +--------------------------+ Wed Mar 2 20:01:32 UTC 2016 Patch /sbin/probe (again) to hopefully fix NVMe devices on Dell laptops. +--------------------------+ Sat Feb 20 17:50:37 UTC 2016 Set empty password for root in /etc/shadow so that root can log in using dropbear. Thanks to MoZes. +--------------------------+ Wed Feb 3 00:13:29 UTC 2016 Include all cpufreq modules. Keep acpi/processor.ko, needed by acpi-cpufreq. Use 'LANG=C fdisk -l' in SeTEFI. +--------------------------+ Wed Jan 13 19:15:03 UTC 2016 Fixed this line in /sbin/probe: elif [ "$MAJOR" = "259" ]; then +--------------------------+ #NOT ACTUALLY MERGED SINCE IT DOESN'T WORK #Tue Jan 12 07:26:02 UTC 2016 # Use tar to extract the kernel module directory version number from the # kernel-modules package. This is needed for a kernel such as 4.4 which # installs modules in /lib/modules/4.4.0/. +--------------------------+ Thu Dec 24 20:35:26 UTC 2015 Patched /sbin/probe for nvme partitions. Thanks to Didier Spaier. +--------------------------+ Wed Dec 23 04:09:29 UTC 2015 Added kernel modules: block/nvme.ko, mmc/host/sdhci-acpi.ko. +--------------------------+ Mon Dec 21 08:40:29 UTC 2015 Updates for auto NFS mounting: sources/initrd/skeleton_initrd.tar.gz: usr/lib/setup/INSNFS: Use '/etc/rc.d/rc.rpc restart' rather than starting rpcbind and rpc.statd directly. etc/services: Removed. Now added by the build_installer.sh script. build_installer.sh: Add /etc/rc.d/rc.rpc to the installer image and chmod +x. Add /usr/sbin/sm-notify from nfs-utils package. Copy /etc/services from the 'a/etc' package to ensure that it's always up to date. Copy /etc/netconfig from the libtirpc package (required for rpc.statd/rpcbind). MoZes. +--------------------------+ Tue Dec 15 21:04:25 UTC 2015 Remove portmap from package list, add libtirpc and rpcbind. Patch INSNFS to run rpcbind instead of rpc.portmap. +--------------------------+ Tue Dec 1 22:28:10 UTC 2015 In /etc/motd, don't suggest gdisk and cgdisk for partitioning GPT, since fdisk and cfdisk work just fine now. Also, remove instructions for starting PCMCIA and Cardbus devices. I doubt many people are still using that. +--------------------------+ Wed Nov 25 05:17:36 UTC 2015 Add /dev/shm and /dev/pts to /etc/fstab. +--------------------------+ Wed Nov 25 02:34:25 UTC 2015 Change 32-bit x86 $ARCH to i586. +--------------------------+ Tue Nov 24 21:54:15 UTC 2015 Added /bin/numfmt to use for converting bytes into K, M, T, or even P. Used in the installer itself and in pkgtools. +--------------------------+ Thu Nov 19 18:02:48 UTC 2015 Replace udev with eudev/libgudev. +--------------------------+ Wed Nov 18 23:25:57 UTC 2015 Also support T (although it's not like I wasn't already) +--------------------------+ Wed Nov 18 22:04:08 UTC 2015 Correct partition sizes, and use K, M, or G. Use -F -F for all mkfs.ext* (shut up and do what I say mode) +--------------------------+ Sat Nov 14 18:54:26 UTC 2015 Add hwdata package to get pci.ids and usb.ids. +--------------------------+ Tue Nov 3 19:40:22 UTC 2015 Added libpcre.so.1, needed by the new grep. +--------------------------+ Thu Oct 29 19:42:58 GMT 2015 No longer build dhcpcd version 3, use the dhcpcd package from the 'n' series. Removed some superfluous white space. Still more to do ;-) +--------------------------+ Thu Aug 27 19:55:26 UTC 2015 Patched build-installer.sh to allow for non-numeric $VERSION in packages. Thanks to MoZes. +--------------------------+ Thu Aug 6 23:42:10 UTC 2015 sed s/procps/procps-ng/g in build-installer.sh. +--------------------------+ Mon May 25 09:47:32 UTC 2015 Merged fixes from MoZes: sources/initrd/skeleton_initrd.tar.gz: 1) etc/profile: The code to parse TERM= from /proc/cmdline only worked properly if TERM= was at a particular position in the string. This is for handling installations on ARM using the serial console and 'screen': --- etc/profile.orig 2013-12-03 09:04:26.000000000 +0000 +++ etc/profile 2015-05-25 09:44:02.078325859 +0100 @@ -7,8 +7,8 @@ # Allow a user to set the default TERM entry by specifying TERM= # as a kernel command line parameter: -if cat /proc/cmdline | grep TERM= 1> /dev/null 2> /dev/null ; then - export $( sed -n -e "s/.*\(TERM=.*\ \).*/\1/p" < /proc/cmdline ) +if cat /proc/cmdline | grep "TERM=[a-zA-Z0-9]" 1> /dev/null 2> /dev/null ; then + export TERM=$( sed 's/.*TERM=\([^ ]*\).*/\1/' < /proc/cmdline ) elif cat /proc/cmdline | grep console=ttyS 1> /dev/null 2> /dev/null ; then 2) etc/rc.d/rc.inet1 10 seconds timeout is too little on the SheevaPlug and I've also seen a report on LQ about the same issue on x86_64 -- I suppose it depends on the network driver or the NIC itself. I needed at _least_ 30 seconds for the SheevaPlug to get an IP, and about 12 seconds for the Banana Pi. --- etc/rc.d/rc.inet1.orig 2011-04-15 13:48:22.000000000 +0100 +++ etc/rc.d/rc.inet1 2015-05-25 10:01:19.357259132 +0100 @@ -22,7 +22,7 @@ if grep -q $(echo ${EDEV}: | cut -f 1 -d :): /proc/net/wireless ; then continue # skip wireless interfaces fi - /sbin/dhcpcd -t 10 -L -T $EDEV 1>/etc/dhcpc/dhcpcd-${EDEV}.info 2>/dev/null & + /sbin/dhcpcd -t 35 -L -T $EDEV 1>/etc/dhcpc/dhcpcd-${EDEV}.info 2>/dev/null & done fi /build_installer.sh: (ARM only): Set the system clock from the RTC prior to fudging the date because on some devices the system clock is not set when the RTC module loads. +--------------------------+ Mon May 4 04:13:36 UTC 2015 In rc.S, move fakedate hack so that udev runs first. +--------------------------+ Wed Apr 29 18:56:54 UTC 2015 Merged updates from MoZes: build_installer.sh: Enable setting the terminal window title even through 'screen'. Fri Feb 20 19:18:22 UTC 2015 Fetch libfdisk and libsmartcols from /lib, not /usr/lib. The location was changed since there are binaries outside of /usr that link to these. +--------------------------+ Fri Feb 20 01:19:54 UTC 2015 Updated /sbin/probe to work with the new util-linux fdisk. Updated SeTEFI to work with the new util-linux fdisk. +--------------------------+ Fri Feb 13 22:27:44 UTC 2015 Fix calls to setterm that reset the foreground/background to set the desired colors rather than use "default" since it appears the util-linux people broke that, too. +--------------------------+ Fri Feb 13 20:41:50 UTC 2015 Updates to rc.S in the skeleton_initrd.tar.gz to fix issues with the new util-linux update. Also, use -F with mke2fs, otherwise it'll hang if the partition was previously formatted. +--------------------------+ Wed Feb 11 01:10:20 UTC 2015 Add libsmartcols fom the new util-linux. +--------------------------+ Sun Feb 8 14:40:19 GMT 2015 Merged updates from MoZes: build_installer.sh: Added rtl_nic to the list of firmwares to include. This firmware is added to the ARM 'a/kernel-firmware' package so will not be present on x86. +--------------------------+ Sun Nov 16 19:12:13 UTC 2014 Applied fixes from MoZes: 1) bash patch #12 is UTF8 so it was not caught by the grep, so anything past patch 11 was never applied. Fixed to match file types of 'ASCII' and 'text'. 2) ARM does not have syslinux, so we don't want to exit the Installer build because of this. Only try and move the syslinux-nomtools binary if we're running on an *86* platform. +--------------------------+ Tue Sep 9 03:31:31 UTC 2014 Use syslinux-nomtools on the installer. Thanks to Didier Spaier. +--------------------------+ Wed Jul 23 22:08:21 UTC 2014 Fix SeTDOS script to show the partition device properly when setting the security level. Thanks to luvr on LQ. +--------------------------+ Fri Apr 18 11:13:15 BST 2014 All of these changes have been tested on ARM and x86. 1. build_installer.sh Include both versions of tar from the a/tar-*.t?z package: Many users use the installer as a rescue system and tar-1.13 has issues with files with long file names: http://www.linuxquestions.org/questions/slackware-14/%5Bto-devs%5D-slackware-install-iso-tar-version-tooo-old-4175497116/ The pkgtools inside the installer call tar-1.13 directly. All other scripts that call tar (font setting) work properly with tar-1.26. 2. installer/sources/initrd/skeleton_initrd.tar.gz All of these changes are baked into the new version of the archive. Summary:- etc/inittab: Upon shutdown of the installer, kill dropbear to prevent installations performed over SSH from hanging until the SSH client times out. usr/lib/setup/setup: Move from x86-centric man-at-keyboard method of finalising the installation. Offer 'reboot' or 'shell' from a dialog prompt - helpful for systems that were remotely installed. Switch single line of text instruction to remove CD with a dialog box. +--------------------------+ Sat Feb 15 22:26:01 UTC 2014 Merged updates from MoZes: build_installer.diff Changelog: Add 's' and 'x' termcaps so the installation looks pretty when installed over serial console using 'screen' as a terminal emulator. ARM: Switch the 'versatile' kernel name to 'armv7'. Drop an ancient serial console bug fix. skeleton_initrd.tar.gz: Modified etc/profile: to allow user to set TERM= as a kernel paramater, so as to set $TERM up front. The previous logic was that when console=ttyS was found, the TERM defaulted to vt100 which was unfortunate because the ARM devices are usually always booted from a serial console with that kernel parameter, but are controlled from a fully functional Linux terminal emulator. Modified etc/rc.S Move the keyboard selector to after the profile scripts have been executed, so the user can set a useful TERM value that works properly with dialog. Modified: usr/lib/setup/SeTnet Added 'clear' after dialog finishes, to avoid a messy screen on the serial port (for example, after eth0 is initialised with DHCP, drop bear starts and splatters its key generation over the blue background, looking badly integrated). +--------------------------+ Fri Nov 1 01:02:38 UTC 2013 Mute the LVM scan at the end of package installation. +--------------------------+ Sun Oct 27 21:53:15 UTC 2013 Filter "partitions" found on a USB installer stick in SeTDOS so that they don't appear in the menu. +--------------------------+ Sun Oct 13 23:49:24 UTC 2013 Rework /sbin/probe to use gdisk instead of parted, as parted does not display the partition type code. This allows detecting swap space without first running mkswap on it, and prevents unknown partition types from showing up as Linux partitions. Added SeTEFI script, which will set up an EFI System Partition. A partition found on the same device as the root Linux partition will be preferred, but otherwise any EFI partition found on /dev/sd{a,b,c...} will be used. Add /bin/pr, needed by rescan-scsi-bus.sh. +--------------------------+ Wed Sep 25 05:12:29 UTC 2013 Add support for installing the packages from a USB stick. This will require changing usbimg2disk to not modify the initrd. +--------------------------+ Thu Sep 12 07:19:29 UTC 2013 Add freq_table.ko if KMS is requested in the build. +--------------------------+ Sat Sep 7 21:08:24 UTC 2013 Don't install pt_chown. It's been removed from glibc-2.18 as a possible security hole, and is patched out of the glibc-2.17 in -current. +--------------------------+ Thu Sep 5 22:23:36 UTC 2013 Added os-prober package, since liloconfig is going to use that to find Windows partitions (avoiding the issue of a USB installer stick being detected as a Window installation). +--------------------------+ Fri Aug 16 20:25:48 UTC 2013 Fixed SeTPKG to handle changed output from "dialog --checklist" that no longer includes quotes. Also handles the older versions of dialog. +--------------------------+ Mon Aug 12 20:50:58 UTC 2013 Use /etc/dialogrc from the dialog package, since the syntax has changed. +--------------------------+ Tue Aug 6 01:46:50 UTC 2013 Fixed a couple typos in PROMPThelp. +--------------------------+ Wed Jul 24 20:09:54 UTC 2013 Added liblzo2, needed by mkfs.btrfs. +--------------------------+ Mon Jul 15 20:46:24 UTC 2013 Stop removing 8021q module, which is needed to use VLANs. +--------------------------+ Sun Jul 7 06:48:25 UTC 2013 Apply mancha's glibc crypt() patch to dropbear. +--------------------------+ Thu Jun 20 20:07:11 UTC 2013 Add /etc/nfsmount.conf to default to use NFSv3. +--------------------------+ Mon Jun 10 18:49:44 UTC 2013 Reset background color after a CD switch during installation. +--------------------------+ Fri Apr 19 05:43:00 UTC 2013 In probe script (part of initrd skel), set LANG to C. This will avoid parsing issues if we ever i18n this thing... +--------------------------+ Wed Mar 27 03:37:00 UTC 2013 By default, add nomodeset to the kernel command line. If modesetting is needed, boot with kms.s or kmssmp.s. +--------------------------+ Tue Mar 19 05:30:44 UTC 2013 Added missing ehci-hcd module. +--------------------------+ Sat Mar 16 05:45:29 UTC 2013 Modified usbboot.img to work with EFI as well. Don't build efiboot.img. +--------------------------+ Tue Mar 12 04:35:07 UTC 2013 Keep GPU modules, needed for video on UEFI. (ADD_KMS=1) Support building an EFI boot image. (EFIBOOT=1) Keep USB host modules, as huge.s is no longer building those in. Added two Terminus fonts to the initrd. Added setfont to busybox (needed to load an appropriate sized Terminus font when KMS is used). Patched busybox to fix a compile issue with glibc-2.17. +--------------------------+ Wed Feb 20 18:53:11 UTC 2013 Support not adding network card firmware. (Stuart Winter) +--------------------------+ Fri Sep 7 18:06:06 UTC 2012 Updated /sbin/rescan-scsi-bus. +--------------------------+ Tue Sep 4 19:06:38 UTC 2012 Added comment=x-gvfs-show to /etc/fstab's cdrom entry. Increased full install size in setup to 7.3+ GB. +--------------------------+ Thu Aug 23 17:25:09 UTC 2012 Include sdhci.ko and sdhci-pci.ko. +--------------------------+ Mon Aug 13 20:01:09 UTC 2012 Include the staging/hv modules. Bind mount /dev in SeTconfig. Support virtual devices such as /dev/vda and /dev/xvda in /sbin/probe. +--------------------------+ Thu Aug 9 02:36:37 UTC 2012 Added support for MMC devices to /sbin/probe (needed for Raspberry Pi). Thanks to David Spencer. +--------------------------+ Sat Aug 4 21:05:51 UTC 2012 Switch from gdisk to gptdisk, and add new cgdisk and fixparts tools. Copy /etc/modprobe.d/ and /lib/modprobe.d/ to the installer. +--------------------------+ Thu Jul 26 21:52:59 UTC 2012 Use '-s' option with eject, otherwise it fails. Fixed a missing space that broke a SeTnet dialog: - "\nAttempting to fetch a remote configuration file using $PROTO ..."54 56 + "\nAttempting to fetch a remote configuration file using $PROTO ..." 54 56 +--------------------------+ Sun Jul 22 16:33:05 UTC 2012 Added XFCE series in SeTPKG. +--------------------------+ Mon Jul 16 23:37:35 UTC 2012 Add toplevel /run directory. +--------------------------+ Tue Jul 3 16:23:38 UTC 2012 Allow nic=auto for headless installs. Fixed /sbin/probe for systems that mix HP RAID with regular hard drives. +--------------------------+ Tue Jul 3 03:11:40 UTC 2012 Change location of usb.ids and pci.ids to /usr/share/hwdata. +--------------------------+ Mon Jul 2 04:01:09 UTC 2012 Patched busybox to fix wget -P option. Thanks to Kirill Smirnoff. +--------------------------+ Thu Jun 28 16:42:39 UTC 2012 Added installer-arm.diff from MoZes (identify ARM installer via dropbear) +--------------------------+ Thu Jun 28 16:04:57 UTC 2012 Switch from module-init-tools to kmod. Added missing dosfsck (the dangling symlinks were there already :) +--------------------------+ Thu Apr 12 22:06:48 UTC 2012 Fix missing bash on 32-bit by adding an i486) options section to build_installer.sh. +--------------------------+ Sat Apr 7 17:10:14 UTC 2012 Use real GNU bash as the shell. Point /bin/sh -> /bin/bash Don't build a shell into busybox. +--------------------------+ Wed Mar 28 01:30:00 UTC 2012 fixed placement of /lib{,64}/libz.so.*, danke MoZes +--------------------------+ Mon Mar 26 00:53:08 UTC 2012 In SeTpartitions, use -d single -m single as it increases performance by about 15%, and Luigi Genoni says multiple metadata copies are useless when using a btrfs filesystem consisting of a single device or partition (which is all the installer currently supports). +--------------------------+ Sat Apr 23 18:17:21 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: Try to load loop device module. build_installer.sh: Try to load loop device module. Copy loop.ko to the installer. +--------------------------+ Thu Apr 21 21:20:23 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: Fixed GPT on RAID controllers. Slightly less trivial. ;-) +--------------------------+ Thu Apr 21 02:54:52 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: Added GPT support on RAID devices in /sbin/probe. Thanks to Greg Chandler. (This was trivial, really!) +--------------------------+ Sun Apr 17 19:25:03 UTC 2011 build_installer.sh: ADD_MANPAGES to arm. +--------------------------+ Fri Apr 15 18:25:28 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: Merged updated skel from alienBOB with PXE server changes. +--------------------------+ Tue Apr 12 19:21:47 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: applied skeleton_dhcpcd.diff. +--------------------------+ Tue Apr 12 00:19:24 UTC 2011 Added busybox httpd applet with all options. +--------------------------+ Mon Apr 11 05:35:21 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: SetDOS, add umask modes for vfat similar to ntfs. +--------------------------+ Sat Mar 26 18:58:48 UTC 2011 build_installer.sh: Retain virtio kernel modules. +--------------------------+ Sat Mar 26 04:33:40 UTC 2011 sources/busybox/busybox-1.18.4.tar.bz2: Upgraded. +--------------------------+ Fri Mar 25 04:01:51 UTC 2011 build_installer.sh: Add fsck.*. Adjusted kernel installation to handle /kernels/memtest/memtest sources/initrd/skeleton_initrd.tar.gz: rc.S, scan RAID better +--------------------------+ Sat Mar 19 01:40:10 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: Add terse installation mode that only displays one line per package so that people's heads do not explode +--------------------------+ Fri Mar 18 04:44:04 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: Increase estimate of full install size to "6.5+ GB" +--------------------------+ Tue Mar 8 05:13:38 UTC 2011 build_installer.sh: Add a kludgy but working man page whitelist and get man pages on the x86 and x86_64 installers for partitioning tools, filesystem tools, network stuff, and a few other things. Added partx, findmnt, lsblk, fsfreeze, fstrim, and swaplabel. Don't wipe /usr/man. Use bzip2 for man pages (wins compression tests on man page text here easily) ln -sf /etc/motd /root/README sources/initrd/skeleton_initrd.tar.gz: Add /usr/man directory. rc.S: chmod 755 /etc/rc.d/rc.pcmcia +--------------------------+ Fri Mar 4 03:29:09 UTC 2011 build_installer.sh: Add btrfs-progs, gdisk, and gcc-g++ (for libstdc++). sources/initrd/skeleton_initrd.tar.gz: support btrfs. +--------------------------+ Fri Feb 25 20:36:22 UTC 2011 build_installer.sh: Add ddrescue package. +--------------------------+ Fri Feb 25 05:44:11 UTC 2011 build_installer.sh: Support ADD_MANPAGES option to add preprocessed manpages. Not enabled for now. This would really need a blacklist and/or whitelist first. sources/initrd/skeleton_initrd.tar.gz: Replace broken zcat symlink with the proper script. Point /usr/bin/zcat at the zcat script. Add a quick+dirty /usr/bin/man shell script to display man pages. sources/busybox/busybox-1.18.3.tar.bz2: Upgraded. sources/busybox/busybox-dot-config: Upgraded. +--------------------------+ Fri Feb 18 03:22:17 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: fdisk -l now shows HPFS/NTFS/exFAT, so we need to check for NTFS before FAT in SeTDOS to avoid a false FAT detection. +--------------------------+ Wed Feb 16 07:45:13 UTC 2011 build_installer.sh: util-linux-ng -> util-linux +--------------------------+ Tue Feb 15 23:04:25 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: Patched /sbin/probe to add support for GPT partitions. +--------------------------+ Fri Jan 21 16:08:24 UTC 2011 sources/initrd/skeleton_initrd.tar.gz: Remove /etc/modprobe.conf (request from MoZes) +--------------------------+